Configuring the RF signal
R&S
®
SMM100A
362
User Manual 1179.1341.02 ─ 05
7.11.4
Modulation settings
Access:
► Select "RF > Analog Modulation".
The "Modulation" dialog contains all functions and settings to configure the analog
modulations, the LF signal sources for performing a modulation, and the LF signal
output.
The remote commands required to define these settings are described in:
●
Chapter 13.16.3.2, "SOURce:AM subsystem"
●
Chapter 13.16.3.3, "SOURce:FM subsystem"
●
Chapter 13.16.3.4, "SOURce:PM subsystem"
●
Chapter 13.16.3.5, "SOURce:PULM subsystem"
●
Chapter 13.16.10, "SOURce:LFOutput subsystem"
7.11.4.1
Pulse modulation settings
Access:
► Select "RF > Analog Modulation > Pulse Modulation".
Table 7-8: Pulse modulation
"Signal Source > Pulse Generator " (internal)
"Signal Source > External"
The "Pulse Modulation" dialog contains all parameters required to configure pulse
modulation and pulse signal generation.
It also displays the pulse signal graphically.
The remote commands required to define these settings are described in
ter 13.16.3.5, "SOURce:PULM subsystem"
Analog modulations