Rohde & Schwarz SMM100A, User Manual

Page: 737 / 1088

Remote control commands
R&S
®
SMM100A
737 User Manual 1179.1341.02 ─ 05
[:SOURce]:INPut:USER:CLOCk:LEVel <Level>
[:SOURce]:INPut:USER:TRIGger:LEVel <Level>
Sets the threshold for any input signal at the User1-3 connectors.
Parameters:
<Level> float
Range:
0.1 to 2
Increment: 0.1
*RST:
1
Example: See Example "Global connectors settings configuration"
on page 732.
Manual operation: See "Threshold User1-3 Input" on page 538
[:SOURce]:INPut:USER:PULM:LEVel <Level>
Parameters:
<Level> float
Range:
0.1 to 2
Increment: 0.1
*RST:
1
Default unit: V
Example: See Example "Global connectors settings configuration"
on page 732.
Manual operation: See "Threshold User4-6 Input/Threshold Pulse Input"
on page 364
[:SOURce]:INPut:USER:CLOCk:IMPedance <Impedance>
[:SOURce]:INPut:USER:TRIGger:IMPedance <Impedance>
Selects the input impedance for the external trigger inputs.
Parameters:
<Impedance> G1K | G50
*RST:
G1K
Example: See Example "Global connectors settings configuration"
on page 732.
Manual operation: See "Impedance Clock/Trigger Input" on page 538
[:SOURce]:INPut:USER:CLOCk:SLOPe <Slope>
Sets the polarity of the active slope of an externally applied clock signal.
Parameters:
<Slope> NEGative | POSitive
*RST:
POSitive
SOURce subsystem