Remote control commands
R&S
®
SMM100A
857
User Manual 1179.1341.02 ─ 05
Marker settings
[:SOURce<hw>]:BB:MCCW:TRIGger:OUTPut<ch>:MODE
.................................................857
[:SOURce<hw>]:BB:MCCW:TRIGger:OUTPut<ch>:ONTime
.............................................. 857
[:SOURce<hw>]:BB:MCCW:TRIGger:OUTPut<ch>:OFFTime
.............................................857
[:SOURce<hw>]:BB:MCCW:TRIGger:OUTPut<ch>:PATTern
.............................................. 857
[:SOURce<hw>]:BB:MCCW:TRIGger:OUTPut<ch>:PULSe:DIVider
.................................... 858
[:SOURce<hw>]:BB:MCCW:TRIGger:OUTPut<ch>:PULSe:FREQuency?
............................858
[:SOURce<hw>]:BB:MCCW:TRIGger:OUTPut<ch>:DELay
.................................................858
[:SOURce<hw>]:BB:MCCW:TRIGger:OUTPut<ch>:MODE
<Mode>
Defines the signal for the selected marker output. For detailed description of the regu-
lar marker modes, refer to
Parameters:
<Mode>
RESTart | PULSe | PATTern | RATio
*RST:
RESTart
Example:
See
Manual operation:
See
[:SOURce<hw>]:BB:MCCW:TRIGger:OUTPut<ch>:ONTime
<OnTime>
[:SOURce<hw>]:BB:MCCW:TRIGger:OUTPut<ch>:OFFTime
<OffTime>
Sets the number of samples in the off period of the corresponding marker signal.
Parameters:
<OffTime>
integer
Range:
1 to 16777215
*RST:
1
Example:
Manual operation:
See
[:SOURce<hw>]:BB:MCCW:TRIGger:OUTPut<ch>:PATTern
<Pattern>, <BitCount>
Defines the bit pattern used to generate the marker signal.
Parameters:
<Pattern>
numeric
*RST:
#H2
<BitCount>
integer
0 = marker off, 1 = marker on
Range:
1 to 64
*RST:
2
Example:
See
Manual operation:
See
SOURce subsystem