General instrument functions
R&S
®
SMM100A
533
User Manual 1179.1341.02 ─ 05
See also
Chapter 11.2, "Configuring local and global connectors"
11.2.4
RF connectors settings
Access:
1. Perform one of the following:
● In the "RF block", select "RF" > "RF Frequency" > "RF Connectors".
● In the "control signal block" next to the RF block, select
● Select "System Config > Setup > RF Connectors".
The "RF Connectors" dialog gives an overview of the mapping of the logical signals
to the connectors; the displayed connectors depend on the installed options. The
signal assignment to the dedicated RF connectors, for example LO In/Out or Inst
Trig, is fixed.
Selecting a connector name accesses directly the related connector settings.
2. Select the "Signal" name to access the dialog with respective settings.
3. Use the built-in
function to display the physical location of the
selected connector.
Configuring local and global connectors