Glossary: List of the often used terms and abbreviations
R&S
®
SMM100A
1040
User Manual 1179.1341.02 ─ 05
Glossary: List of the often used terms and
abbreviations
B
Base unit:
This term describes a R&S
SMM100A equipped with baseband generator
and R&S
SMM-B1006.
Baseband:
The baseband signal, i.e. the I/Q stream at the output of the "Baseband"
block.
In rear cases, the term Baseband is used as abbreviation of a "Baseband" block itself.
Baseband domain:
A common term for signal processing up to the I/Q modulation.
The signal in the baseband domain of the R&S
SMM100A is digital.
BS:
Basestation
C
Channel (Digital Input, Digital Output):
The signal provided at a digital interface con-
nector or the output stream at the digital output interface may consist of several multi-
plexed channels. Do not mistake the term
channel
used here with the term signal path.
A digital channel is a part of an I/Q stream.
Clock:
A mandatory internal or an external reference clock signal for generating the
timing pulse in the instrument.
Complete file path:
The complete file path specifies the root directory and all subdir-
ectories that contain a file or folder.
Synonyms to this expression are "full file path" and "absolute file path".
See also
Chapter 13.5.2, "Accessing files in the default or in a specified directory"
Computer name:
An unambiguous indication of the instrument in a LAN that uses a
The default computer name follows the syntax
SMM100A-<serial number>
, e.g.
SMM100A-102030
.
Synonym:
See
.
Continuous Wave Mode:
CW/Mod:
An internally generated control signal that turns off/on digital modulation, i.e.
the signal is generated in unmodulated form.
