Rohde & Schwarz SMM100A, User Manual

Page: 488 / 1088

File and data management
R&S
®
SMM100A
488 User Manual 1179.1341.02 ─ 05
► To reset an individual parameter: Open its context-sensitive menu and select "Pre-
set this parameter...".
●
"Factory Preset"
A factory preset is the most profound preset function that resets almost all instru-
ment settings, including reference oscillator, network and remote access settings.
Retained are the following settings:
–
Security, password, and settings protected by these passwords
– User-defined data, like setups or data lists
– Settings that relate to an integration of the instrument in a measurement setup.
► To restore the factory defaults, select System Config > Setup > Settings > Factory
Preset .
Note: Perform a "Factory Preset" only if it is necessary. After a "Factory Preset",
the network connection to the instrument no longer exists.
Presetting the instrument to a user-defined instrument state
The reset functions set the parameters and operating modes to default values prede-
fined by the factory. Alternatively to these default settings, you can:
●
Define user-specific recall settings to be restored after a preset
(see
Chapter 10.2.3, "How to recall user settings automatically after preset" ,
on page 490)
●
Store and reload user-defined instrument states
(see
Chapter 10.4.2, "How to save and recall instrument settings" , on page 497)
Mark / Do not mark parameters changed from preset
To survey the current state of the settings concerning default values, the
R&S
SMM100A offers a feature that visually identifies deviations from the default val-
ues.
For more information, see Chapter 10.2.2, "How to identify parameters which are not in
a preset state" , on page 489.
10.2.1 Preset, set to default and factory preset settings
Preset ..........................................................................................................................488
Set To Default ..............................................................................................................489
Preset this Parameter ................................................................................................. 489
Execute Factory Preset ...............................................................................................489
Preset
Resets all parameters and switching states, and closes all opened dialogs.
Restoring the (default) instrument configuration