Rohde & Schwarz SMM100A, User Manual

Page: 511 / 1088

File and data management
R&S
®
SMM100A
511 User Manual 1179.1341.02 ─ 05
2. Enable "LAN Interface"
3. Select "Samba Services".
4. Enable the "SMB 1.0/2.0 Client".
5. Enable the "SMB 1.0/2.0 Server".
6. Enter the "Security Password".
The default password is 123456 . For more information, refer to Chapter 11.5,
"Using the security settings" , on page 562.
7. Select "Accept".
To enable file transfer over USB
1. Select "System Config > Setup > Security > Security > General"
2. Select "Disk & Memory".
3. Enable "USB Storage"
4. Enter the "Security Password".
The default password is 123456 . For more information, refer to Chapter 11.5,
"Using the security settings" , on page 562.
5. Select "Accept".
10.9.2 Accessing the file system of the R&S SMM100A via FTP
If the R&S SMM100A is connected to a LAN, you can use file transfer protocol (FTP) to
access the file system and to transfer files from and to the instrument.
How to: see Chapter 12.7.3, "How to connect to LAN" , on page 620.
To access the file system via FTP
We assume that the instrument and the remote PC are connected to a LAN.
1. Enable file transfer via FTP
2. Enable write permission on the file system
3. On the remote PC, start the Windows Explorer.
4. In the address field, enter
ftp://<"IP Address" of the Instrument>
, e.g.
ftp://10.124.0.166 .
Tip: The R&S SMM100A indicates its IP address on the block diagram.
A log-on dialog opens and requests a password.
The default user name and password is instrument .
Tip:
Default password
The FTP and SAMBA file access use the user "instrument" with default password
"instrument".
How to transfer files from and to the instrument