Getting Started
R&S
®
FSW
84
User Manual 1173.9411.02 ─ 19
Particularities in Windows dialog boxes
In some cases, e.g. if you want to install a printer, original Windows dialog boxes are
used. In these dialog boxes, the rotary knob and function keys do not work. Use the
touchscreen instead.
3.4.4.1
Entering Numeric Parameters
If a field requires numeric input, the keypad provides only numbers.
1. Enter the parameter value using the keypad, or change the currently used parame-
ter value by using the rotary knob (small steps) or the UP or DOWN keys (large
steps).
2. After entering the numeric value via keypad, press the corresponding unit key.
The unit is added to the entry.
3. If the parameter does not require a unit, confirm the entered value by pressing the
ENTER key or any of the unit keys.
The editing line is highlighted in order to confirm the entry.
3.4.4.2
Entering Alphanumeric Parameters
If a field requires alphanumeric input, you can use the on-screen keyboard to enter
numbers and (special) characters (see
Alternatively, you can use the keypad. Every alphanumeric key represents several
characters and one number. The decimal point key (.) represents special characters,
and the sign key (-) toggles between capital and small letters. For the assignment refer
to
.
Entering numbers and (special) characters via the keypad
1. Press the key once to enter the first possible value.
2. All characters available via this key are displayed.
3. To choose another value provided by this key, press the key again, until your
desired value is displayed.
4. With every key stroke the next possible value of this key is displayed. If all possible
values have been displayed, the series starts with the first value again. For infor-
mation on the series refer to
5. To change from capital to small letters and vice versa, press the sign key (-).
6. When you have chosen the desired value, wait for 2 seconds (to use the same key
again), or start the next entry by pressing another key.
Operating the Instrument
