Remote Commands
R&S
®
FSW
806
User Manual 1173.9411.02 ─ 19
Parameters:
<Time>
Range:
min value to max value
*RST:
1 s
Default unit: seconds
Manual operation:
See
11.5.13.4
Configuring EMI Limit Lines
The commands required to define limit lines for EMI measurements are described in
chapter 11.8.4, "Configuring Display and Limit Lines"
11.5.13.5
Controlling LISN
The commands required to control a LISN are described here.
INPut:LISN:FILTer:HPASs[:STATe]
.................................................................................806
INPut:LISN:PHASe
<Phase>
This command selects the phase of the LISN you want to measure.
Parameters:
<Phase>
L1
L2
L3
N
*RST:
L1
Example:
INP:LISN:PHAS N
Selects the N phase.
Manual operation:
See
INPut:LISN:FILTer:HPASs[:STATe]
<State>
This command turns the 150 kHz highpass filter for the ENV216 network on and off.
Parameters:
<State>
ON | OFF
*RST:
OFF
Example:
INP:LISN:HPAS ON
Turns the filter on.
Manual operation:
See
Configuring and Performing Measurements
