Rohde & Schwarz FSW13, User Manual

Page: 804 / 1150

Remote Commands
R&S
®
FSW
804 User Manual 1173.9411.02 ─ 19
Useful commands for configuring EMI markers described elsewhere:
●
CALCulate<n>:
​
MARKer<m>[:
​
STATe]
​
on page 932
CALCulate<n>:
​
DELTamarker<m>[:
​
STATe]
​
on page 930
●
CALCulate<n>:
​
MARKer<m>[:
​
STATe]
​
on page 932
CALCulate<n>:
​
DELTamarker<m>[:
​
STATe]
​
on page 930
●
CALCulate<n>:
​
DELTamarker<m>:
​
MREF
​
on page 930
●
CALCulate<n>:
​
MARKer<m1>:
​
LINK:
​
TO:
​
MARKer<m2>
​
on page 931
CALCulate<n>:
​
DELTamarker<m1>:
​
LINK:
​
TO:
​
MARKer<m2>
​
on page 929
CALCulate<n>:
​
DELTamarker<m>:
​
LINK
​
on page 929
●
CALCulate<n>:
​
MARKer<m>:
​
TRACe
​
on page 932
Remote commands exclusive to configuring EMI markers
CALCulate:DELTamarker<m>:FUNCtion:FMEasurement:DETector
.................................... 804
CALCulate:MARKer<m>:FUNCtion:FMEasurement:DETector
............................................ 804
CALCulate:DELTamarker<m>:FUNCtion:FMEasurement:DETector <Detector>
This command selects the detector for a specific deltamarker during the final evalua-
tion.
If the deltamarker is not yet active, the command also turns the deltamarker on.
Parameters:
<Detector> OFF
no final measurement is performed
AVER
average detector
CAV
CISPR Average detector
CRMS
RMS Average detector
POS
maximum peak detector
QPE
quasipeak detector
*RST:
OFF
Manual operation: See "Final Test Detector" on page 301
CALCulate:MARKer<m>:FUNCtion:FMEasurement:DETector <Detector>
This command selects the detector for a specific marker during the final measurement.
If the marker is not yet active, the command also turns the marker on.
Configuring and Performing Measurements