Getting Started
R&S
®
FSW
63
User Manual 1173.9411.02 ─ 19
Fig. 3-8: Adding a new measurement channel
3. Change the frequency range for this spectrum display:
In the "Frequency" dialog box, set the
center frequency
to
500
MHz
and the
span
to
1
GHz
.
Fig. 3-9: Frequency spectrum of the calibration signal with a larger span
4. Repeat the previous steps to activate a third Spectrum window.
Change the frequency range for this spectrum display:
In the "Frequency" dialog box, set the
center frequency
to
64
MHz
and tap "Zero
Span".
As the calibration signal does not vary over time, the level versus time diagram dis-
plays a straight line.
Trying Out the Instrument
