Rohde & Schwarz FSW13, User Manual

Page: 775 / 1150

Remote Commands
R&S
®
FSW
775 User Manual 1173.9411.02 ─ 19
Example: CALC:PSE:SUBR 10
Sets 10 peaks per range to be stored in the list.
Manual operation: See "Peaks per Range" on page 248
11.5.7.4 Performing a Spurious Measurement
The following commands are required to perform a Spurious measurement:
SENS:SWE:MODE LIST
, see
[SENSe:
​
]SWEep:
​
MODE
​
on page 731
INITiate[:
​
IMMediate]
​
on page 694, see chapter 11.5.1, "Performing Measure-
ments" , on page 692
11.5.7.5 Retrieving and Saving Settings and Results
The following commands analyze and retrieve measurement results for Spurious
measurements.
Useful commands for spurious emission measurements described elsewhere
●
CALCulate:
​
LIMit<k>:
​
FAIL?
​
on page 987
●
TRACe<n>[:
​
DATA]
​
on page 922
●
TRACe<n>[:
​
DATA]:
​
MEMory?
​
on page 924
●
TRACe<n>[:
​
DATA]:
​
X?
​
on page 924
11.5.7.6 Programming Example: Spurious Emissions Measurement
In the following example, the Spurious Emissions measurement is configured by defin-
ing ranges and parameters to create the following sweep list.
Configuring and Performing Measurements