Data Management
R&S
®
FSW
556
User Manual 1173.9411.02 ─ 19
To export trace data and table results
Trace data can be exported either from the "Trace" menu, or from the "Save/Recall"
menu.
1. Press the TRACE key, then select the "Trace Config" softkey and switch to the
"Trace/Data Export" tab.
Or:
Select the "Save" icon in the toolbar, then select the "Export" softkey.
2. Select the "Export Config" softkey to configure the export settings.
a) Select "Export all Traces and all Table Results" to export all available measure-
ment result data for the current application, or select a specific "Trace to
Export".
b) Optionally, select the "Include Instrument Measurement Settings" option to
insert additional information in the export file header.
c) If necessary, change the decimal separator to be used for the ASCII export file.
3. Select the "Export Trace to ASCII file" button.
4. In the file selection dialog box, select the storage location and file name for the
export file.
5. Select "Save" to close the dialog box and export the data to the file.
8.4.3 How to Export a Peak List
You can save the results of a marker peak list to an ASCII file.
1. Press the MKR FUNCT key.
2. Select the "Marker Peak List" softkey.
3. Configure the peak search and list settings as described in
"Marker Peak List Configuration"
4. Set the marker peak list "State" to "On".
5. Press the RUN SINGLE key to perform a single sweep measurement and create a
marker peak list.
6. Select the "Marker Peak List" softkey to display the "Marker Peak List" dialog box
again.
7. If necessary, change the decimal separator to be used for the ASCII export file.
8. Select the "Export Peak List" button.
9. In the file selection dialog box, select the storage location and file name for the
export file.
10. Select "Save" to close the dialog box and export the peak list data to the file.
Importing and Exporting Measurement Results for Evaluation
