Rohde & Schwarz FSW13, User Manual

Page: 538 / 1150

Data Management
R&S
®
FSW
538 User Manual 1173.9411.02 ─ 19
8 Data Management
The R&S FSW allows you to store and load instrument settings, as well as import and
export measurement data for analysis at a later time. Finally, you can store or print the
measurement results displayed on the screen.
General storage and import/export functions are available via the toolbar. Some spe-
cial storage functions are (also) available via softkeys or dialog boxes in the corre-
sponding menus, e.g. trace data or marker peak lists.
● Restoring the Default Instrument Configuration (Preset) ...................................... 538
● Protecting Data Using the Secure User Mode ...................................................... 540
● Storing and Recalling Instrument Settings and Measurement Data ..................... 542
● Importing and Exporting Measurement Results for Evaluation .............................553
● Creating Screenshots of Current Measurement Results and Settings ................. 560
8.1 Restoring the Default Instrument Configuration (Pre-
set)
When delivered, the R&S FSW has a default configuration. You can restore this
defined initial state at any time as a known starting point for measurements. This is
often recommendable as a first step in troubleshooting when unusual measurement
results arise.
To restore the default instrument configuration for all channels at once
► Press the PRESET key.
Alternatively to the factory default settings, you can define user-specific recall set-
tings to be restored after a preset or reboot, see
"To recall settings automatically
after preset or reboot" on page 553.
After you use the PRESET function, the history of previous actions is deleted, i.e. any
actions performed previously cannot be undone or redone using the UNDO/REDO
keys.
Remote command:
*RST
or
SYSTem:PRESet
To restore the default configuration for a single channel
The default measurement settings can also be reset for an individual channel only,
rather than resetting the entire instrument.
► In the "Overview", select the "Preset Channel" button.
The factory default settings are restored to the current channel. Note that a user-
defined recall settings file is
NOT restored.
Restoring the Default Instrument Configuration (Preset)