manualshive.com logo in svg

Rohde & Schwarz FSW13, User Manual

Share
Download
Rohde & Schwarz FSW13 User Manual Download Page 71

Getting Started

R&S

®

FSW

71

User Manual 1173.9411.02 ─ 19

6. To increase the size of the third zoom window, drag the "splitter" between the win-

dows to the left or right or up or down.

Fig. 3-19: Enlarged zoom window

3.3.8 Saving Settings

In order to restore the results of our measurements at a later time, we will store the
instrument settings to a file.

To save the instrument settings to a file

1.

Tap the "Save" icon in the toolbar.

2.

Press the keyboard key on the front panel to display the online keyboard, as you
will have to enter text in the next step.

3. In the "Save" dialog box, tap the "File Name" field and enter 

MyMultiViewSetup

using the keyboard.

 

Trying Out the Instrument

Summary of Contents for FSW13































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands