Rohde & Schwarz FSW13, User Manual

Page: 510 / 1150

Common Analysis and Display Functions
R&S
®
FSW
510 User Manual 1173.9411.02 ─ 19
Marker State
Activates or deactivates the marker in the diagram.
Remote command:
CALCulate<n>:
​
MARKer<m>[:
​
STATe]
​
on page 932
CALCulate<n>:
​
DELTamarker<m>[:
​
STATe]
​
on page 930
Marker Type
Toggles the marker type.
The type for marker 1 is always "Normal", the type for delta marker 1 is always "Delta".
These types cannot be changed.
Note: If normal marker 1 is the active marker, switching the "Mkr Type" activates an
additional delta marker 1. For any other marker, switching the marker type does not
activate an additional marker, it only switches the type of the selected marker.
"Normal" A normal marker indicates the absolute value at the defined position
in the diagram.
"Delta" A delta marker defines the value of the marker relative to the speci-
fied reference marker (marker 1 by default).
Remote command:
CALCulate<n>:
​
MARKer<m>[:
​
STATe]
​
on page 932
CALCulate<n>:
​
DELTamarker<m>[:
​
STATe]
​
on page 930
Noise Measurement State
Activates or deactivates noise measurement for the marker in the diagram.
This function is only available for normal markers.
If activated, the marker displays the noise power density measured at the position of
the marker.
For details see chapter 7.4.1.7, "Measuring Noise Density" , on page 488.
Remote command:
CALCulate<n>:
​
MARKer<m>:
​
FUNCtion:
​
NOISe[:
​
STATe]
​
on page 956
CALCulate<n>:
​
MARKer<m>:
​
FUNCtion:
​
NOISe:
​
RESult?
​
on page 956
Switching All Noise Measurements Off
Deactivates noise measurement for all markers.
Remote command:
CALCulate<n>:
​
MARKer<m>:
​
FUNCtion:
​
NOISe[:
​
STATe]
​
on page 956
7.4.3.3 Phase Noise Measurement Marker
For each of the 16 markers phase noise measurement can be activated. Phase noise
measurement markers are configured in the "Phase Noise Config" dialog box, using
the "Phase Noise" function.
The individual marker settings correspond to those defined in the "Marker" dialog box.
Any settings to the marker state or type changed in the "Marker Function" dialog box
are also changed in the "Marker" dialog box and vice versa.
Marker Usage