Rohde & Schwarz FSW13, User Manual

Page: 99 / 1150

Applications and Operating Modes
R&S
®
FSW
99 User Manual 1173.9411.02 ─ 19
LTE ..............................................................................................................................101
Noise Figure ................................................................................................................101
Phase Noise ................................................................................................................101
Pulse Measurements .................................................................................................. 101
Realtime Spectrum ......................................................................................................101
TD-SCDMA BTS ......................................................................................................... 102
TD-SCDMA UE ........................................................................................................... 102
Transient Analysis .......................................................................................................102
Vector Signal Analysis (VSA) ......................................................................................102
WLAN ..........................................................................................................................102
Spectrum
In the Spectrum application the provided functions correspond to those of a conven-
tional spectrum analyzer. The analyzer measures the frequency spectrum of the RF
input signal over the selected frequency range with the selected resolution and sweep
time, or, for a fixed frequency, displays the waveform of the video signal. This applica-
tion is used in the initial configuration.
For details see chapter 5, "Measurements" , on page 110.
Remote command:
INST:SEL SAN
, see
INSTrument[:
​
SELect]
​
on page 686
1xEV-DO BTS
The 1xEV-DO BTS application requires an instrument equipped with the 1xEV-DO
BTS Measurements option, R&S
FSW-K84. This application provides test measure-
ments for 1xEV-DO BTS downlink signals (base station signals) according to the test
specification.
For details see the R&S FSW-K84/-K85 User Manual.
Remote command:
INST:SEL BDO
, see
INSTrument[:
​
SELect]
​
on page 686
1xEV-DO MS
The 1xEV-DO MS application requires an instrument equipped with the 1xEV-DO MS
Measurements option, R&S
FSW-K85. This application provides test measurements
for 1xEV-DO MS uplink signals (mobile signals) according to the test specification.
For details see the R&S FSW-K84/-K85 User Manual.
Remote command:
INST:SEL MDO
, see
INSTrument[:
​
SELect]
​
on page 686
3G FDD BTS
The 3G FDD BTS application requires an instrument equipped with the 3GPP Base
Station Measurements option, R&S
FSW-K72. This application provides test measure-
ments for W-CDMA downlink signals (base station signals) according to the test speci-
fication.
For details see the R&S FSW-K72/-K73 User Manual.
Remote command:
INST:SEL BWCD
, see
INSTrument[:
​
SELect]
​
on page 686
Available Applications