Rohde & Schwarz FSW13, User Manual

Page: 650 / 1150

Network and Remote Operation
R&S
®
FSW
650 User Manual 1173.9411.02 ─ 19
The IP address consists of four number blocks separated by dots. Each block contains
3 numbers in maximum (e.g. 100.100.100.100), but also one or two numbers are
allowed in a block (as an example see the preinstalled address).
Subnet Mask
Defines the subnet mask. The TCP/IP protocol is preinstalled with the subnet mask
255.255.255.0. If the DHCP server is available ("DHCP On"), this setting is read-only.
The subnet mask consists of four number blocks separated by dots. Each block con-
tains 3 numbers in maximum (e.g. 100.100.100.100), but also one or two numbers are
allowed in a block (as an example see the preinstalled address).
DHCP
Switches between DHCP server available (On) or not available (Off). If a DHCP server
is available in the network, the IP address and subnet mask of the instrument are
obtained automatically from the DHCP server.
Network Configuration
Opens the standard Windows "Network Configuration" dialog box for further configura-
tion.
10.4.2 GPIB Settings
Alternatively to connecting the R&S FSW to a LAN, the GPIB interface can be used to
connect a remote PC. For details see chapter 10.1.1.2, "GPIB Interface (IEC 625/IEEE
418 Bus Interface)" , on page 613).
The GPIB settings are defined in the "GPIB" tab of the "N Remote" dialog box.
GPIB Address ............................................................................................................. 651
Identification String ......................................................................................................651
Reset to Factory String ............................................................................................... 651
Network and Remote Control Settings