manualshive.com logo in svg

Rohde & Schwarz FSW13, User Manual

Share
Download
Rohde & Schwarz FSW13 User Manual Download Page 44

Getting Started

R&S

®

FSW

44

User Manual 1173.9411.02 ─ 19

You can hide the softkey display, e.g. when using remote control, in order to enlarge
the display area for the measurement results ("Setup > Display > Displayed Items").
See the User Manual for details.

Context-sensitive Menus

Markers and traces in the display, as well as the information in the channel bar, have
context-sensitive menus. If you right-click on a marker or trace in the display, or infor-
mation in the channel bar (or tap it for about 1 second), a menu is displayed which con-
tains the same functions as the corresponding softkey. This is useful, for example,
when the softkey display is hidden.

On-screen Keyboard

The on-screen keyboard is an additional means of interacting with the instrument with-
out having to connect an external keyboard.

The on-screen keyboard display can be switched on and off as desired using the "On-
Screen Keyboard" function key beneath the screen.

When you press this key, the display switches between the following options:

Instrument Tour

Summary of Contents for FSW13































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands