Note:
The Return home manoeuvre can be cancelled at any time by selecting the
Red, onscreen
[Cancel return to boat]
option. Once selected the UAV will
stop and hover in its current position.
29.12 Disconnect UAV remote controller from
MFD
When you have finished using the UAV app it is recommended that you
disconnect the USB cable from the UAV’s remote controller.
Before performing a MFD Factory reset, or software update, ensure that
your UAV’s remote controller is either powered off or disconnected from
your MFD.
29.13 Fish on / Circle me mode
When Fish on / Circle me mode is activated your UAV will launch and circle
your vessel, maintaining its camera’s view on your vessel and recording the
camera’s video feed. Fish on / Circle me mode can also be initiated when
your UAV is already in flight.
When your UAV is in Fish on / Circle me mode you should ensure your vessel
speed does not exceed 10 knots or the UAV may not be able to keep up with
your vessel. If your UAV cannot keep up slow your vessel speed.
1
[Cancel Fish On]
/
[Cancel Circle me]
Selecting
[Cancel Fish On]
/
[Cancel Circle me]
will stop Fish On /
Circle me mode and the UAV will hover in its current location. If
required you can manually stop recording by selecting the
[Stop]
icon.
2
[UAV icon]
The UAV icon can be displayed in the Chart app. The icon
includes a camera heading graphic, a Course Over Ground (COG)
vector and a line linking your vessel icon to your UAV icon.
3
[Virtual joystick]
In Fish On / Circle me mode the left virtual joystick provides
[Up]
and
[Down]
controls to adjust the UAV’s distance from your vessel.
426
Summary of Contents for LIGHTHOUSE 4
