Raymarine LIGHTHOUSE 4, Operation Instructions Manual

Page: 359 / 504

3. Select the Cruise icon.
4. Use the
[+] (Plus) and [-] (Minus) buttons to adjust your desired engine RPM.
5. Select [Enable] .
6. Place the remote control handles in the forward gear position, and place
the handles in the wide ‑ open throttle position.
Your engine RPM will now increase to the set level.
If cruise is active the cruise sidebar icon will be colored amber. Hiding the
sidebar will not affect cruise operation.
In cruise mode you can adjust the desired RPM using the [+] (Plus) and [-]
(Minus) buttons.
Cancelling cruise control
To regain manual throttle control cruise mode must be cancelled.
Cruise control mode can be cancelled by selecting [Disable] from the cruise
sidebar.
23.7 Sport exhaust
On supported outboards the option to switch the sport exhaust feature on
and off will be available on the Mercury engine data sidebar.
The sport exhaust feature allows you to change the sound of the outboard
idle relief exhaust volume. Enabling the sport exhaust feature opens an
exhaust passage, allowing a more deep exhaust sound.
Note:
Mercury Smartcraft Connect Gateway software release 3 or greater is
required.
23.8 Steering angle indicator
The steering angle indicator provides an onscreen indication of the steering
position.
The Steering angle indicator is available in the Mercury app and the Mercury
sidebar.
Steering angle indicator locations
1. Location in fullscreen app page.
2. Location in Mercury sidebar.
3. Location in splitscreen app page.
The Steering angle indicator is non-linear and is more sensitive at lower
steering angles.
Note:
The steering angle indicator is disabled when a Mercury joystick is active.
23.9 Engine data page
The Mercury engine data page displays various engine related data for your
Mercury engines.
The Engine data page can be accessed from the Mercury app: [Menu >
Engine data] or from the Mercury sidebar by selecting [More] .
Mercury app
359