Raymarine LIGHTHOUSE 4, Operation Instructions Manual

Page: 321 / 504

[Message failed to send] — Direct message has failed to be
acknowledged by the recipient's hardware.
Note:
The failed message will remain in the [Inbox] .
[Link ID] — A link ID generated and used by responder vessels.
Note:
Replying to a direct message or broadcast that has a link ID will
send a reply that contains the same link ID.
21.14 Import and export waypoints and routes
over NMEA networks
Waypoints and routes can be imported and exported over NMEA 0183 and
NMEA 2000 (N2K) / SeaTalkng ®
Note:
• Receiving waypoints and routes is subject to the waypoint and
route capacity of your MFD. The transfer will fail if the MFD’s
capacity is reached during the transfer. For capacity limits refer to:
p.141 — Waypoint, routes and tracks capacity
• It is recommended that importing and exporting waypoints over
NMEA 0183 and NMEA 2000 is used for small batches of less than
150 waypoints. The preferred method for importing and exporting
larger amounts of waypoint is via memory card transfer. Refer to:
p.91 — Import/export
The import and export options are available from the Import/Export menu:
[Homescreen > My data > Import/Export > Import/export from network] .
The [Import waypoints via N2K] and [Import Routes via N2K] options are
only enabled when another compatible MFD is present on the NMEA 2000 /
SeaTalkng ®network.
The [Import via 0183] and [Export via 0183] options are always enabled and
require interaction on the other MFD.
Importing Waypoints or Routes over NMEA 2000
Follow the steps below to Import Waypoints or Routes over an NMEA 2000 /
SeaTalkng ® network.
Note:
LightHouse 3 and LightHouse 4 MFDs allow more than 1 waypoint or route
to have the same name. It is recommended that you check that the import
will not create waypoints or routes with the same name and if necessary
rename them before importing.
First responder
321