2. Place your finger on the White marker and then slide it left or right to
adjust the setting the required value, alternatively use a
[Rotary controller]
to adjust the setting the required value.
Note:
The fader control will only be displayed for systems that support fading..
Adjusting multi-zone controls
When supported by the entertainment system the audio app can be
configured to control the volume of multiple zones simultaneously.
From the
[Audio settings]
menu:
[Menu > Audio settings]
:
1. Select the zones you want to include in Multi-zone volume control.
2. Enable and disable multi-zone volume control by selecting the text as
shown below.
1.
To enable multi-zone control select the text ‘
[This zone]
’.
2. To disable multi-zone control select the text ‘
[Multi-zone]
’.
SR200 diagnostics mode
The SR200 diagnostic mode can be accessed from the audio settings menu
from the master MFD on the network. The diagnostics mode should be
referred to when liaising with Sirius product support.
1.
Reset — Performs a factory reset and power cycle of the SR200.
2. Diagnostics mode — Displays the SR200’s diagnostic information.
413
Summary of Contents for LIGHTHOUSE 4
