Raymarine LIGHTHOUSE 4, Operation Instructions Manual

Page: 354 / 504

Autopilot sidebar selection
When the autopilot is engaged, the Autopilot sidebar is displayed
automatically. With the autopilot disengaged (i.e.: in Standby mode), you can
display the Autopilot sidebar by selecting the Autopilot icon located on the
top right of the screen, or by manually selecting the Autopilot sidebar icon
from the Mercury sidebar options.
Autopilot sidebar states
1. With the autopilot in standby, the Autopilot sidebar has [Autoheading] or
[Route] options. You can select [Autoheading] to engage the autopilot
and maintain the current heading.. If you are already following a route,
you can select
[Route] to engage the autopilot in Route mode. In Route
mode, the boat will follow the route and when a waypoint is reached the
boat will automatically proceed to the next waypoint in the route.
2. Autoheading — When Autoheading is engaged, the sidebar displays the
current target heading and provide controls to increase and decrease
the heading angle in 1° or 10° increments.
3. Route mode — In Route mode, the sidebar displays navigation data
and provides controls to switch to [Autoheading] , advance to the next
waypoint ( [Advance wpt.] ), or restart the “route follow” command ( [Restart
here] ).
Enabling and disabling Mercury® autopilot integration
Integration with Mercury® autopilots can be enabled and disable from the
Autopilot settings menu.
From the [Homescreen] :
1. Select [Settings] .
354