Raymarine LIGHTHOUSE 4, Operation Instructions Manual

Page: 282 / 504

Feature/setting Radar type
Maximum Range • Cyclone — Solid state open array = 96nm
• Magnum — Open array = 4kW = 72nm,
6kW = 96nm
• Quantum™ 2 Doppler — Radome = 24nm
• Quantum™ — Radome = 24nm
• SuperHD™ — Open array = 72nm
• HD — Open array = 72nm
• HD — Radome = 48nm
• Digital — Radome (non-HD) = 48nm
Colors • Cyclone — Solid state open array = 256
• Magnum — Open array = 256
• Quantum™ 2 Doppler — Radome = 256
• Quantum™ — Radome = 256
• SuperHD™ — Open array = 256
• HD — Open array = 256
• HD — Radome = 256
• Digital — Radome (non-HD) = 8
20.4 Opening the Radar app
The Radar app is opened by selecting a page icon from the Homescreen
that includes the Radar app.
Pre-requisites:
1. Ensure your Radar scanner is compatible, check the latest details
available on the Raymarine website, if in doubt please contact an
authorized Raymarine dealer for advice.
2. Ensure you have installed your Radar scanner in accordance with the
documentation that was supplied with your Radar.
The Radar app will open in 1 of 3 states:
Off/Not Connected
If the ‘ Off/Not Connected ’ message is displayed then:
• your Radar scanner may be powered down, or
• your MFD cannot establish a connection with your Radar scanner
Select [On] to power up your Radar. If the ‘ Radar not found ’ message is
displayed then a connection could not be established, ensure that network
and power connections to your Radar and MFD are correct and free from
damage and then power cycle your system. If the Radar scanner can still
not be found refer to your Radar’s installation documentation for further
troubleshooting information.
Off
If the ‘ Off ’ message is displayed then your Wi-Fi connected Radar scanner is
paired but powered off, select [On] to power up your Radar
282