2.
[Below transducer]
— This is the default reading from the transducer
(zero offset applied).
3.
[Below keel]
— The depth reading will be decreased from the transducer’s
default reading.
Setting a depth offset
You can set the point depth readings are taken from.
1. Open the
[Fishfinder app]
.
2. Open the
[Transducer]
settings menu:
[Menu > Settings Transducer]
.
3. If you have more than 1 sonar transducer installed, then you will need
to select the relevant transducer.
4. Select either
[Below keel]
,
[Below waterline]
, or
[Below transducer]
as
required.
i.
If you have selected
[Below keel]
enter your transducer’s distance
above the lowest point of your keel in the offset field.
ii. If you have selected
[Below waterline]
enter your transducer’s distance
below the waterline in the offset field.
Setting a temperature offset
If your sonar transducer includes a temperature sensor then you can check
and calibrate your temperature reading.
1. Open the
[Fishfinder app]
.
2. Open the
[Transducer]
settings menu:
[Menu > Settings Transducer]
.
3. If you have more than 1 sonar transducer installed, then you will need
to select the relevant transducer.
4. If required, select the
[Enable temperature sensor]
toggle switch to
enable the sensor..
5. Measure the actual water temperature using a thermometer.
6. Check your reading against the displayed
[Current temperature ]
.
7. If the readings are not the same, select
[Calibrate temp]
and enter the
difference between your 2 readings.
RealVision™ AHRS calibration
RealVision™ 3D and RealVision™ 3D Max transducers include a built-in AHRS
(Attitude and Heading Reference Sensor), which measures the motion of
your vessel to assist in the rendering of sonar images. After installation all
RealVision™ transducers require calibration.
An uncalibrated transducer can produce an offset to the front edge of the
render of the bottom in the sonar image, as illustrated below.
62
Summary of Contents for LIGHTHOUSE 4
