Raymarine LIGHTHOUSE 4, Operation Instructions Manual

Page: 312 / 504

DSC target symbols are static and remain in the reported position, however
if a DSC position update is received a new DSC waypoint symbol can be
placed at the new location.
DSC targets will remain on the system until cancelled manually.
Accessing target options
Target specific options are available for targets that are currently being
tracked. The target options can be accessed from the target’s context
menu and from the Pop-over options in the relevant target list. The options
available are dependent on the type of target.
To access a target’s context menu:
• Press and hold on the target onscreen, or
• Highlight the target onscreen using the [Direction controls] and press the
[OK] button.
To access the target list Pop-over menu:
• Select the target in the relevant target list, or
• Highlight the target in the list using the [Direction controls] and press the
[OK] button.
DSC target options
The following options are available for DSC targets.
• [Designate TOI] — If your MFD is configured for STEDS you can
designate a target as a Target of Interest (TOI). For details see:
p.313 — Target Of Interest (TOI)
• [Cancel Target] — Cancels the DSC target and removes the DSC waypoint
from the system.
• [Intercept] — Initiates a Target interception . For details see:
p.195 — Target intercept
• [Goto] — Initiate navigation to the target position.
• [Show on chart] — Displays the target centered in the Chart app.
DSC target list
The target list identifies: The MMSI number of the originating vessel, its
reported Position, Range and Bearing from your vessel and the Type of
distress. If the target has been designated as a TOI then the related Link ID
will also be displayed.
The DSC target list can be accessed from the Targets menu in the Radar app
and Chart app:
[Menu > Targets > DSC]
Selecting a target from the list highlights the selected target in the LiveView
app pane on the right of the page and opens the Pop-over menu.
312