Raymarine LIGHTHOUSE 4, Operation Instructions Manual

Page: 393 / 504

Important:
Calibrating the horizon correctly is essential for accurate Augmented
Reality overlay. Calibrating on calm water and in clear sight of the horizon
is recommended.
26.3 AR200 setup for Augmented Reality
Before using the Augmented Reality features, it’s important to correctly install
and setup the AR200 Augmented Reality sensor.
Refer to the AR200 Installation manual (87372) to determine the correct
physical installation and connections for using the AR200 as part of an
Augmented Reality system.
26.4 ClearCruise™ Object Detection (Video
Analytics) overview
The Object Detection (Video Analytics) features provide audible and
visual alerts when “non-water” objects are identified by connected
M100/M200/M300 Series cameras.
Objects that visually differ from the water will be identified by the camera as
a “non-water” object.
The following features are available with Object detection:
• [Highlight detected objects] — Enables/disables object highlighting, which
automatically identifies and highlights “non-water” objects.
• [Beep on detection] — Enables/disables an audible beep when an object is
detected ( [Highlight detected objects] must be enabled)
• [Display estimated range] — Enables/disables display of an object’s
estimated range from your vessel ( [Highlight detected objects] must be
enabled, and object must be closer than approximately 100 m (~300 ft)).
ClearCruise (Object Detection / Video Analytics, and Augmented Reality)
393