Panasonic LP-GS Series, Serial Communication Command Manual

Page: 101 / 180

101
Name
(> Name in LP-400/V)
Data length
[byte]
Data contents Remarks
Laser power
correction
3 “000”–“999” [%]
• The correction ratio is calculated
using the value set at the laser
settings as 100%.
• For the composite codes, these
settings are applied to both 1D
and 2D side.
Scan speed
correction
3 “001”–“999” [%]
Pulse cycle correction
*1
(3) “001”–“999” [%]
Linefeed *2 (1)
“0”: No linefeed
“1”: Enable linefeed
• Applied only to the 2D code and
2D side of the composite code.
When the code data is set in the
several strings, set whether the
linefeed is applied to the human
readable text or not.
• When the linefeed is omitted,
linefeed is disabled.
• When the linefeed is enabled,
the linefeed spacing cannot be
omitted.
• When the linefeed is disabled,
do not set the linefeed spacing.
• When the linefeed is disabled,
the linefeed spacing is not
included in the response data for
readout.
Linefeed spacing *2 (7)
Model Setting range [mm]
LP-GS051(-L) “000.000”–“055.000”
LP-GS052 “000.000”–“030.000”
LP-RC350S “000.000”–“085.000”
LP-RF200P
LP-RV200P
“000.000”–“090.000”
Total data length
54
(47), (46)
or
57
(50), (49)
The data length is fixed.
• LP-GS/LP-RC series when linefeed is enabled: 54-byte
• LP-GS/LP-RC series when linefeed is disabled: 47-byte or 46-byte
• LP-RF/LP-RV series when linefeed is enabled: 57-byte
• LP-RF/LP-RV series when linefeed is disabled: 50-byte or 49-byte
*1 : Only for LP-RF series and LP-RV series.
*2 : When the linefeed is disabled, these items can be omitted.
ンㄆㄇㄆㄓㄆㄏ㄄ㄆ
• If the object type set in the specified object number is not the bar code/2D code, the laser marker returns the negative
response.
• If the character strings of bar code/2D code contain a control code, the control code is not included in the human
readable text.
• For the composite codes, the settings from “character height” are applied to both 1D and 2D side.
• With LP-400/V compatible command mode, you cannot set and readout the settings of the human readable text for
PDF417, iQR code, QR code for Chinese characters (GB/T 18284), and CODE93.
• With LP-400/V compatible command mode, you cannot set and readout the settings of the human readable text for QR
code with the mode setting “Auto”.
• With LP-400/V compatible command mode, “Bold line width” cannot be set. To this item the setting by Laser Marker
NAVI smart or the initial value if it was not set, is applied.
ME-LP-GS-SR-COMP-3