Panasonic LP-GS Series, Serial Communication Command Manual

Page: 114 / 180

114
⿎ Example of command settings
Condition: X-movement = 10, Y-movement = -5.5, Rotation movement = 120,
Number of overwritings = 2, Overwriting interval = 0.5,
Y-axis mirroring = 0, X-axis mirroring = 1, Proportional type = 1
• Setting
Transmission data [STX] ALC S +010.000-005.500+120.00020.5011 [CR]
• Readout
Transmission data [STX] ALC R [CR]
Response data [STX] ALC A +010.000-005.500+120.00020.5011 [CR]
3-10-2 External offset settings: OFC
Sets the I/O input method for “External Offset Function” to adjust the marking position for the entire marking data in the file.
⿎ Setting request data / response data for readout
Start
code
OFC
Sub
command
[Input method]
1-byte
(Check sum) End code
Sub command is “S” for the setting request data and “A” for the response data for readout.
⿎
Readout request data
Start
code
OFC R (Check sum) End code
⿎
Data description
Name
Data length
[byte]
Data contents Remarks
Input method 1
“0”: OFF
“1”: Low 4-bit
“2”: Low 8-bit
It is the input method (I/O or communication
command) of the offset value.
Total data length 1 The data length is fixed.
ンㄆㄇㄆㄓㄆㄏ㄄ㄆ
• Characters specified by SIN command and external offset function with I/O cannot be set together in one file.
• External offset function cannot be used with on-the-fly marking at regular intervals or on-the-fly marking with multiple
triggers.
• At LP-400/V compatible command mode, “Low 10-bit” and “SEO command” of the input method cannot be set and
readout.
⿎
Example of command settings
Condition: Input method = 2
• Setting
Transmission data [STX] OFC S 2 [CR]
• Readout
Transmission data [STX] OFC R [CR]
Response data [STX] OFC A 2 [CR]
ME-LP-GS-SR-COMP-3