Panasonic LP-GS Series, Serial Communication Command Manual

Page: 81 / 180

81
3-6-3 Expiry date/time settings: LMT
Configures the “expiry” function used to mark the date with a specified period added or subtracted to/from the current date.
⿎
Setting request data / response data for readout
Start
code
LMT
Sub
command
[Expiry time No.] [Periods]
[Expiry time unit] [Today included]
7-byte
(Check
sum)
End code
Sub command is “S” for the setting request data and “A” for the response data for readout.
⿎ Readout request
Start
code
LMT R
[Expiry time No.]
1-byte
(Check sum) End code
⿎
Data description
Name
Data length
[byte]
Data contents Remarks
Expiry time No. 1
“1”–“4”: Expiry date/time 1 to 4
“5”–“8”: Global expiry date/time 17 to 20
Periods 4 “-999”–“+999”
It is the period added or subtracted to/
from the current date and time.
Expiry time unit 1
“0”: Year
“1”: Month
“2”: Date
“3”: Hour
“4”: Minute
It is the unit of the period added or
subtracted to/from the current date and
time.
Today included 1
“0”: Today not included
“1”: Today included
Specifies whether or not to include
today in the base date for addition or
subtraction.
It is valid when the expiry time unit is
year or month.
Total data length 7 The data length is fixed.
⿎ Example of command settings
Condition: Expiry time No. = 1, Periods = 6, Expiry time unit = 2, Today included = 0
• Setting
Transmission data [STX] LMT S 1+00620 [CR]
• Readout
Transmission data [STX] LMT R 1 [CR]
Response data [STX] LMT A 1+00620 [CR]
ンㄆㄇㄆㄓㄆㄏ㄄ㄆ
• With LP-400/V compatible command mode, the expiry time numbers 5 to 16 and global expiry time numbers 21 to 32
cannot be set and readout.
ME-LP-GS-SR-COMP-3