![background image](http://html1.mh-extra.com/html/panasonic/lp-gs-series/lp-gs-series_serial-communication-command-manual_3637167030.webp)
30
• When the response permission of the marking end verification (MST) command is not set
Laser marker
Positive response: ACK00
Positive response: ACK00
Status readout response: STSA02100
(Marking in progress / trigger ready OFF)
Status readout response: STSA02110
(Non-marking state / trigger ready ON)
Send the next request
command after confirming
the marking completed
with STS response.
Check the laser marker
status when appropriate.
Marking trigger command: MRKS1
Marking trigger command: MRKS1
Status checking command: STSR
Status checking command: STSR
External device
ME-LP-GS-SR-COMP-3
Summary of Contents for LP-GS Series
