Panasonic LP-GS Series, Serial Communication Command Manual

Page: 95 / 180

95
4. When the code type is data matrix/GS1 data matrix
Name
(> Name in LP-400/V)
Data length
[byte]
Data contents Remarks
Object No.
(> Bar code No.)
1 “0”–“7”: Object No. 1100 to 1107
System reserved
value
(Area No.)
1 “0”–“9”, “A”–“F”
This value does not affect the settings
anymore.
Code type 2
“20”: Data matrix without human
readable text
“21”: GS1 data matrix without human
readable text
“22”: GS1 data matrix with human
readable text
With LP-400/V compatible command
mode, the automatic setting of the
human readable text to Data matrix
codes is not available.
Mode 1
“0”: One-byte mode
“1”: Kanji mode
Specify “0” for GS1 data matrix.
Symbol size (vertical) 2
“00”, “08”–“88”
(Combination of vertical and horizontal
is limited *1)
• The number of characters that can
be input varies depending on the
symbol size.
• Specifying “00” for the symbol size
(both for horizontal and vertical)
encodes by the minimum size
(square).
Symbol size
(horizontal)
2
X-position 8
“-999.999”–“+999.999” [mm] It is the center coordinate of the code.
Y-position 8
Rotation angle 7 “-180.00”–“+180.00” [°]
The rotation center is the center of the
code symbol.
Module height
(vertical)
5
“0.001”–“9.999” [mm]
Module width
(horizontal)
5
Total data length 42 The data length is fixed.
*1 : Available combinations for the number of horizontal and vertical symbol modules (vertical X horizontal)
Auto 00×00
Square: 10×10, 12×12, 14×14, 16×16, 18×18, 20×20, 22×22, 24×24, 26×26,
32×32, 36×36, 40×40, 48×48, 52×52, 64×64, 72×72, 80×80, 88×88
Rectangle 08×18, 08×32, 12×26, 12×36, 16×36, 16×48
ンㄆㄇㄆㄓㄆㄏ㄄ㄆ
• With LP-400/V compatible command mode, “Code marking direction” and “Module marking order” cannot be set. To
these items the settings by Laser Marker NAVI smart or the initial values if it was not set, are applied.
• With LP-400/V compatible command mode, the automatic setting of the human readable text to Data matrix codes is
not available. Even enabling the human readable text by Laser Marker NAVI smart, it is disabled when this command is
used.
ME-LP-GS-SR-COMP-3