Panasonic LP-GS Series, Serial Communication Command Manual

Page: 113 / 180

113
3-10 Layout/Position Adjustment Commands
3-10-1 File settings: ALC
Adjusts the marking position and layout for each file. These settings are applied to all marking data in the selected file.
ンㄆㄇㄆㄓㄆㄏ㄄ㄆ
• “Number of overwritings” and “Overwriting interval” settings by this command are applied to the object group No. 1000.
To the object group No. 1000 the marking data converted from LP-400/V files and the data set by LP-400/V compatible
command mode belong.
• With LP-400/V compatible command mode, Z-movement cannot be set.
• When the setting value of the number of overwritings is more than 100, it is not possible to readout the setting by this
command.
⿎ Setting request data / response data for readout
Start
code
ALC
Sub
command
[X-movement] [Y-movement] [Number of overwritings]
[Overwriting interval] [Rotation movement]
[Y-axis mirroring] [X-axis mirroring] [Proportional type]
31-byte or 30-byte
(Check
sum)
End code
Sub command is “S” for the setting request data and “A” for the response data for readout.
⿎
Readout request data
Start
code
ALC R (Check sum) End code
⿎
Data description
Name
(> Name in LP-400/V)
Data length
[byte]
Data contents Remarks
X-movement 8
“-999.999”–“+999.999” [mm]
• Moves the coordinate of the all marking
data in the file.
• The rotation center is the center of the
marking field.
Y-movement 8
Rotation movement 7 “-180.00”–“+180.00” [°]
Number of
overwritings
2 “01”–“99” [times]
Overwriting interval 3
“0.0”–“9.9” [s]
“000”–“060” [s] When on-the-fly marking is set, set always 0
second to overwriting interval.
Y-axis mirroring 1
“0”: Do not invert
“1”: Invert
It is an inversion to Y-axis.
X-axis mirroring 1
“0”: Do not invert
“1”: Invert
It is an inversion to X-axis.
Proportional type *
(> Kerning)
(1)
“1”: Proportional 1
“2”: Proportional 2
“3”: Proportional 3
• When “proportional” is set to the character
spacing type in the character object
settings, select the level of spacing. The
lower the number is, the smaller the
spacing is.
• When this item is omitted, the data set
last (the initial value if it was not set) is
maintained.
Total data length
31
(30)
Fixed length.
• When Proportional type is not omitted: 31-byte
• When Proportional type is omitted: 30-byte
• Response data for readout: 31-byte
* This item can be omitted.
ME-LP-GS-SR-COMP-3