Panasonic LP-GS Series, Serial Communication Command Manual

Page: 128 / 180

128
3-12-2 Scan speed: SSP
Sets the scan speed for the current file.
ンㄆㄇㄆㄓㄆㄏ㄄ㄆ
• The settings by this command are applied to all objects in the file. If you want to change the scan speed correction value
of the specified object only, set the scan speed correction by each object setting.
⿎ Setting request data / response data for readout
Start
code
SSP
Sub
command
[Scan speed]
5-byte
(Check
sum)
End code
Sub command is “S” for the setting request data and “A” for the response data for readout.
⿎ Readout request data
Start
code
SSP R (Check sum) End code
⿎ Data description
Name
Data length
[byte]
Data contents Remarks
Scan speed 5
Model Setting range [mm/s]
LP-GS051
LP-GS052
“00001”–“03000”
LP-GS051-L “00001”–“02000”
LP-RC350S
LP-RF200P
LP-RV200P
“00001”–“12000”
Total data length 5 Fixed length.
⿎ Example of command settings
Condition: Scan speed = 2000
• Setting
Transmission data [STX] SSP S 02000 [CR]
• Readout
Transmission data [STX] SSP R [CR]
Response data [STX] SSP A 02000 [CR]
ME-LP-GS-SR-COMP-3