![background image](http://html1.mh-extra.com/html/panasonic/lp-gs-series/lp-gs-series_serial-communication-command-manual_3637167084.webp)
84
Name
Data length
[byte]
Data contents
Remarks
Start period
6
Lot unit
Setting range
Year, Year (week-
based)
(YYYY00)
“198000”–“209900”
Month
“000001”–“000012”
Date
“000001”–“000031”
Year and month
(YYYYMM)
“198001”–“209912”
Month and date
(00MMDD)
“000101”–“001231”
Day of week
Sun.
“000000”
Mon.
“000001”
Tue.
“000002”
Wed.
“000003”
Thur.
“000004”
Fri.
“000005”
Sat.
“000006”
Hour
“000000”–“000023”
Week
“000001”–“000054”
Minute
“000000”–“000059”
Hour and minute
(00HHmm)
“000000”–“002359”
Counter
“000000”–“999999”
• It is the range of periods to
mark the same lot characters.
• The setting range varies by
lot unit.
• Set “??????” with the start/
end periods to delete it.
• If the period is not set at the
time of readout, “??????” is
returned.
• To delete the period, end the
data here.
• The period that the end
period comes before the start
period cannot be set.
End period
6
Lot character
Min. 0
Max. 18
The number of input characters allowed: Max. 9
characters
Input Method: ASCII code or Shift JIS code (can
be mixed)
• Use the ASCII code to
specify one-byte characters
(single byte characters).
• Use the Shift JIS code to
specify two-byte characters
(double byte characters).
• Specify 0-byte for data length
to delete characters.
Total data length
Max. 33
Variable length.
ンㄆㄇㄆㄓㄆㄏㄆ
• Refer to “2-3-5 Character data input method” (P.37) for details on the character input method and character types with
input restrictions.
• When the lot unit of the lot settings (LTC command) is changed, the lot period (start/end periods) and lot character (LTS
command) settings registered to that lot number are deleted.
• With LP-400/V compatible command mode, the lot numbers 4 to 15 and global lot numbers 20 to 31 cannot be set.
⿎
Example of command settings
Condition:
Lot unit = Year and month
Lot No. = 0, Period No. = 01, Start period = January 2014, End period = December 2014,
Lot character = abcd
• Setting
Transmission data
[STX]
LTS
S
001201401201412abcd
[CR]
• Readout
Transmission data
[STX]
LTS
R
001
[CR]
Response data
[STX]
LTS
A
001201401201412abcd
[CR]
ME-LP-GS-SR-COMP-3
Summary of Contents for LP-GS Series
