Panasonic LP-GS Series, Serial Communication Command Manual

Page: 120 / 180

120
⿎ Setting request data / response data for readout: position/power adjustment for row or column
Start
code
SRA
Sub
command
[Adjustment No.] [Adjustment object] [Target row/column]
[X-movement] [Y-movement]
( [Rotation movement] [Laser power correction] )
32-byte or 22-byte
(Check
sum)
End
code
Sub command is “S” for the setting request data and “A” for the response data for readout.
⿎ Data description
Name
Data length
[byte]
Data contents Remarks
Adjustment No. 2 “00”–“99”
Adjustment object 1
“3”: All columns
“4”: All rows
“5”: Column
“6”: Row
Target row
or
Target column
3 “001”–“400”
• Enables the adjustment item for the
data at the row/column specified.
• When “all columns” or “all rows” is
set to the adjustment object, the fine-
adjustment is applied to the all settings
from the specified column/row.
X-movement 8
“-999.999”–“+999.999” [mm]
• Moves the coordinate of the marking
data in the range of rows/columns
specified.
• It is the movement for the coordinate
after executing Step & repeat.
• When the rotation movement is omitted,
“+000.00” is set.
Y-movement 8
Rotation
movement *
(7) “-180.00”–“+180.00” [°]
Laser power
correction *
(3) “-50”–“+50” [+/-%]
• Corrects the laser power of the marking
data in the range of rows/columns
specified. Specify the correction ratio
in the range of 100±50% relative to the
laser power for the object to which Step
& repeat applies.
• When this item is omitted, “+00” is set.
Total data length
32
(22)
Fixed length.
• When Rotation movement and Laser power correction are not omitted: 32-byte
• When Rotation movement and Laser power correction are omitted: 22-byte
• Response data for readout: 32-byte
* These items can be omitted when the both values are 0. It is not possible to omit one side of them.
⿎ Example of command settings
Condition: Adjustment No. = 0, Adjustment object = 4, Target row = 2, X-movement = 0.1, Y-movement = -0.2,
Rotation movement = 0, Laser power correction = 0
• Setting
Transmission data [STX] SRA S
000.100-000.200
or
000.100-000.200+000.00+00
[CR]
• Readout
Transmission data [STX] SRA R 00 [CR]
Response data [STX] SRA A 000.100-000.200+000.00+00 [CR]
ME-LP-GS-SR-COMP-3