Panasonic LP-GS Series, Serial Communication Command Manual

Page: 135 / 180

135
3-14-2 Command mode: RSM
Switches the command mode between LP-400/LP-V compatible mode and the standard one. This command is available
when LP-400/V compatibility setting is enabled in system settings.
⿎
Setting request data / response data for readout
Start
code
RSM
Sub
command
[Command mode]
1-byte
(Check
sum)
End code
Sub command is “S” for the setting request data and “A” for the response data for readout.
⿎ Readout request data
Start
code
RSM R (Check sum) End code
⿎ Data description
Name Data length [byte] Data contents Remarks
Command mode 1
“0”: LP-400/V command mode
“1”: Standard command mode
Total data length 1 The data length is fixed.
ンㄆㄇㄆㄓㄆㄏ㄄ㄆ
• This command is available only when “LP-400/V compatibility” is enabled in system settings of Laser Marker NAVI
smart.
• When “LP-400/V compatibility” is enabled in system settings of Laser Marker NAVI smart, the command mode is always
“LP-400/V command mode” at the time of starting the remote control mode. To use standard command mode, always
send this command at first or disable “LP-400/V compatibility” in system settings.
• To switch the command mode from “LP-400/V command mode” to “standard command mode” by RSM command, the
communication format (start code, sub-command and etc.) of the setting request data should be followed by LP-400/
V compatible format. The response data to this setting request is returned also in LP-400/V compatible format. The
standard command format is applied afterward.
• The setting by this command is not saved in the laser marker.
⿎ Example of command settings
Condition: Command mode = 1
• Setting
Transmission data [STX] RSM S 1 [CR]
• Readout
Transmission data [STX] RSM R [CR]
Response data [STX] RSM A 1 [CR]
ME-LP-GS-SR-COMP-3