Panasonic LP-GS Series, Serial Communication Command Manual

Page: 121 / 180

121
⿎ Setting request data / response data for readout: when mark OFF setting
Start
code
SRA
Sub
command
[Adjustment No.] [Adjustment object]
[Target row] [Target column]
( [Target row] [Target column] …)
At setting: 3 + 6n-byte
At readout: 9-byte
(Check
sum)
End code
Sub command is “S” for the setting request data and “A” for the response data for readout.
⿎ Data description
Name
Data length
[byte]
Data contents Remarks
Adjustment No. 2 “00”–“99”
If the several pairs of the target row and target
column are specified, each setting is set in the
subsequent No. from the specified No.
Adjustment object 1 “2”: Mark OFF
Target row 3
“001”–“400”
• When the mark OFF setting is applied to only
one data, do not send the further data.
• Specify both row and column. It is not possible
to omit one side of them.
Target column 3
… …
• When the mark OFF is set to two or more data,
set the next row and column in series. These
settings are set in the subsequent adjustment
No.
• Max. 100 pairs of row and column can be set.
Target row (3)
Target column (3)
Total data length
Min. 9
Max. 603
Variable length with 3 + 6n-byte
n = number of the setting pairs of row and column (n
≦
100)
• When setting only one pair of row and column: 9-byte
• When setting 100 pairs of row and column: Max. 603-byte
• Response data for readout: 9-byte
⿎ Example of command settings
Condition: Adjustment No. = 01, Adjustment object = 2,
Target row = 4, Target column = 4, Target row = 8, Target column = 8
• Setting
Transmission data [STX] SRA S 012004004008008 [CR]
• Readout
Transmission data [STX] SRA R 01 [CR]
Response data [STX] SRA A 012004004 [CR]
ンㄆㄇㄆㄓㄆㄏ㄄ㄆ
• With LP-400/V compatible command mode, the Mark OFF can not be set to the unit of whole rows and columns.
• With LP-400/V compatible command mode, the setting cannot be readout if the Mark OFF is set to other than the single
step.
ME-LP-GS-SR-COMP-3