Panasonic LP-GS Series, Serial Communication Command Manual

Page: 41 / 180

41
To input the lot function to character strings
%SFT:n: Lot character
Item Input characters Description
n Represents the lot function number.
0 to 3, 8, 9
Lot No. 0 to Lot No. 3, Lot No. 8, Lot No. 9
A to F Lot No. 10 to Lot No. 15
4 to 7
G to V Global lot No. 16 to Global lot No. 19 *
Global lot No. 16 to Global lot No. 31
* At LP-400/V compatible command mode, G to J are converted to 4 to 7 when the settings are readout.
To input the registered characters (via I/O) to character strings
%INP:n: Registered characters via I/O
Item Input characters Description
n Represents the registered characters function number.
0 to 3
Registered character table No. 0 to Registered character table No. 3
To input “Characters specified by SIN command” to character strings
%MM:Sn: Characters specified by SIN command
Item Input characters Description
MM 00 to 99 Represents the number of max. character digits to be input as characters specified by SIN
command.
n Represents the string number of characters specified by SIN command
0 to 9
String No. 0 to String No. 9
A to F String No. 10 to String No. 15
To input marking settings (laser parameters) to character strings
%POWER: Laser power
%SPEED:
Scan speed
%PULSE: Pulse cycle (LP-RF/LP-RV series only)
ンㄆㄇㄆㄓㄆㄏ㄄ㄆ
• When the character strings set with the functional character are read out by STR command or BRS command, the data
with the functional character set to start with % described earlier are read out. The characters to mark as the functional
characters, such as the counter or date and time values, are not read out.
• Functional characters cannot be specified with character entry per trigger (SIN command), the lot characters (LTS
command) and registered character strings (RKS command).
• To enter “+” or “/” as a character to mark after the counter, enter “%+” or “%/”.
• It is not possible to set the functional characters of %POWER, %SPEED and %PULSE (laser parameters) to the
character strings of bar code and 2D code objects.
• With LP-400/V compatible command mode, any of the following numbers of functional characters cannot be set.
• Counter No. 4 to Counter No. 7
• Expiry time No. 5 to Expiry time No. 7
• Lot No. 4 to Lot No. 7
Example of functional character input
• To input the counter function (Counter Number 0, Six Digits, Zero Fill, No Offset, Decimal Number)
Input “%06:C0” using the ASCII code*: 25 30 36 3A 43 30
• To input the current date function and characters “YYYY. MM. DD”
Input “%04:Y0._%02:M0._%02:D0” using the ASCII code* (the underscore (_) represents a space.)
25 30 34 3A 59 30 2E 20 25 30 32 3A 4D 30 2E 20 25 30 32 3A 44 30
* Spaces in the example above are not included in the input data.
ME-LP-GS-SR-COMP-3