Panasonic LP-GS Series, Serial Communication Command Manual

Page: 94 / 180

94
3. When the code type is QR code or Micro QR code
Name
(> Name in LP-400/V)
Data length
[byte]
Data contents Remarks
Object No.
(> Bar code No.)
1 “0”–“7”: Object No. 1100 to 1107
System reserved
value
(Area No.)
1 “0”–“9”, “A”–“F”
This value does not affect the
settings anymore.
Code type, model 2
“10”: QR code, model 1 (ISO/IEC 18004)
“11”: QR code, model 2 (ISO/IEC 18004)
“12”: micro QR code
Version 2
Code type Setting range
QR code, model 1 “00”–“14”
QR code, model 2 “00”–“22”
Micro QR code “00”–“04”
• The number of input characters
allowed will vary depending on
the version.
• With “00” specified, the version
will be determined automatically
by the number of characters
contained in the QR code and its
content.
Mode 1
“0”: Number
“1”: Alphanumeric
“2”: 8-bit byte (binary)
“3”: Kanji
Error correction level
(CC-C only)
1
“0”: L
“1”: M
“2”: Q
“3”: H
For the micro QR code, “H” is not
available.
X-position 8
“-999.999”–“+999.999” [mm]
It is the center coordinate of the
code.
Y-position 8
Rotation angle 7 “-180.00”–“+180.00” [°]
The rotation center is the center of
the code symbol.
Module height
(vertical)
5
“0.001”–“9.999” [mm]
Module width
(horizontal)
5
Total data length 41 The data length is fixed.
ンㄆㄇㄆㄓㄆㄏ㄄ㄆ
• With LP-400/V compatible command mode, you cannot set and readout the settings for QR code for Chinese characters
(GB/T 18284) and iQR code.
• With LP-400/V compatible command mode, you cannot set and readout the settings for QR code with the mode setting
“Auto” by this command.
• With LP-400/V compatible command mode, “Code marking direction” and “Module marking order” cannot be set. To
these items the settings by Laser Marker NAVI smart or the initial values if it was not set, are applied.
• With LP-400/V compatible command mode, the automatic setting of the human readable text to QR codes and micro
QR codes is not available. Even enabling the human readable text by Laser Marker NAVI smart, it is disabled when this
command is used.
ME-LP-GS-SR-COMP-3