Panasonic LP-GS Series, Serial Communication Command Manual, Page: 122 / 180

122
⿎ Setting request data: Setting deletion
Start
code
SRA S
[Adjustment No.] [Adjustment object]
[Number of adjustment settings to delete]
6-byte or 3-byte
(Check
sum)
End code
⿎ Data description
Name
Data length
[byte]
Data contents Remarks
Adjustment No. (From
which the deletion starts)
2 “00”–“99”
Specifies the number to delete or the number
from which the deletion starts.
Adjustment object
(Delete command)
1 “0”: Delete settings
Number of adjustment
settings to delete *
(3) “001”–“100”
• Specifies the number of conditions to delete
before deleting consecutive adjustment
settings after the specified adjustment number.
• If you omit this item, only the settings of the
specified adjustment number will be deleted.
(The setting to delete one row.)
Total data length
6
(3)
Fixed length.
• When Number of adjustment settings to delete is not omitted: 6-byte
• When Number of adjustment settings to delete is omitted: 3-byte
* When only one adjustment No. is deleted, this item can be omitted.
ンㄆㄇㄆㄓㄆㄏ㄄ㄆ
• If the sum of the adjustment number from which the deletion starts and the number of adjustment settings to delete
exceeds 100, the laser marker returns the negative response.
• In the readout response data when no settings are in the selected adjustment number, the adjustment object is readout
as “0” and the subsequent data do not exist.
⿎ Example of command settings
Condition: Adjustment No. = 0, Adjustment object = 0 (delete the settings of adjustment number 00)
• Setting
Transmission data [STX] SRA S 000 [CR]
Condition: Adjustment No. = 2, Adjustment object = 0, Number of adjustment settings to delete = 10
(delete the settings of the adjustment number 02 to 11)
• Setting
Transmission data [STX] SRA S 020010 [CR]
Condition: Adjustment No. = 2 (if there is no setting for the adjustment number read out)
• Readout
Transmission data [STX] SRA R 02 [CR]
Response data [STX] SRA A 020 [CR]
ME-LP-GS-SR-COMP-3