Panasonic LP-GS Series, Serial Communication Command Manual

Page: 109 / 180

109
⿎ Data example
Condition: Object No. = 1, Point No. = 5, Radiation time = 2000, Laser power correction = 100,
X-position = 25.5, Y-position = -7
• Setting
Transmission data [STX] PRD S 0100502000.0100+025.500-007.000 [CR]
Condition: When setting 4 points:
Object No. = 1, Point No. = 0, Radiation time = 2000, Laser power correction = 100,
X-position = 25.5, Y-position = 7, X-position = 25.5, Y-position = -7,
X-position = -25.5, Y-position = -7, X-position = -25.5, Y-position = 7
• Setting
Transmission data [STX] PRD S
0100002000.0100+025.500+007.000+025.500
-007.000-025.500-007.000-025.500+007.000
[CR]
⿎ Setting request data : When specifying radiation time and laser power correction ratio for
each point
Start
code
PRD S
[Object No.] [Point No.]
[Radiation time] [Laser power correction]
15-byte
(Check
sum)
End code
⿎
Data description
Name
(> Name in LP-400/V)
Data length
[byte]
Data content Remarks
Object No.
(> Point radiation No.)
2 “00”–“15”: Object No. 1400 to 1415
Point No. 3 “000”–“049”
Specifies the radiation time and laser
power correction ratio by a point.
It is not possible to specify the radiation
time and laser power correction ratio for
the multiple points at once.
Radiation time 7 “00000.1”–“99999.9” [ms] The unit of the radiation time is always [ms].
Laser power
correction
3 “000”–“999” [%]
The correction ratio is calculated using the
value set at the laser settings as 100%.
Total data length 15 Fixed-length data.
⿎ Data example
Condition: Object No. = 1, Point No. = 3, Radiation time = 2000, Laser power correction = 100
• Setting
Transmission data [STX] PRD S 0100302000.0100 [CR]
ME-LP-GS-SR-COMP-3