Panasonic LP-GS Series, Serial Communication Command Manual

Page: 28 / 180

28
2-2 Communication Sequence
The communication sequence of this product mainly consists of the sequence where the laser marker transmits the
response data for the (command) data requested from external devices.
As an exception, the laser marker transmits the response data automatically if you have set the response permission of the
marking end verification (MST) command.
⿎
Reception timeout
The time-out duration of this product is set to 10 seconds from receiving the telegraphic message from the head till the end
transmitted from the external device.
If a reception timeout occurs, the telegraphic message transmitted will be discarded and the laser marker will not transmit
the response data.
To resume the communication, transmit the correct telegraphic message once again.
⿎ Communication sequence of setting/readout request data
When the requested data was received normally from the external device, the laser marker transmits positive response to
the setting request data and transmits readout data to the readout request data.
After sending the command, confirm the response data from the laser marker. Do not send the next command before
receiving the response.
Laser marker
Positive response (ACK)
Send Receive
Receive Send
Command (setting request data)
External device
Readout response
Send Receive
Receive Send
Command (readout request data)
⿎ Communication sequence when the request data for setting/readout cannot be accepted
When the request data transmitted from the external device to the laser marker are not acceptable, the laser marker
transmits negative response.
Laser marker
Negative response (NAK)
Send Receive
Receive Send
Command (setting/readout request data)
External device
ME-LP-GS-SR-COMP-3