Panasonic LP-GS Series, Serial Communication Command Manual

Page: 63 / 180

63
3-3-8 Marking end verification: MST
Enables automatic response of marking result (e.g. normal end, and error occurrence, etc.) at the end of marking.
For the communication sequence of this command, refer to “Communication sequence when the marking end verification
(MST) command response is enabled” (P.29).
⿎
Setting request data / response data for readout
Start
code
MST
Sub
command
[Response setting]
1-byte
(Check sum) End code
Sub command is “S” for the setting request data and “A” for the response data for readout.
⿎ Readout request data
Start
code
MST R (Check sum) End code
⿎ Data description
Name
Data length
[byte]
Data contents Remarks
Response setting 1
“0”: Response prohibited
“1”: Response permitted
Total data length 1 The data length is fixed.
ンㄆㄇㄆㄓㄆㄏ㄄ㄆ
• Once you set the response settings of the marking end verification, they are valid during the remote mode.
• When the marking end verification is used, set the response permission before every shifting to the remote mode. This
command setting will be restored to the response prohibited state once you deactivate the remote mode.
ME-LP-GS-SR-COMP-3