Panasonic LP-GS Series, Serial Communication Command Manual

Page: 74 / 180

74
3-5-4 Character object settings: STC
Sets the position and size of the character object (reference list type) and conditions including text characteristics.
ンㄆㄇㄆㄓㄆㄏ㄄ㄆ
• This command is applied to the character objects (reference list type).
• If you want to change the position and laser power correction value of the character object only, use SPC command as a
shortened command.
• Configurations of TrueType object cannot be set with communication command.
• With LP-400/V compatible command mode, the character object other than the reference list type cannot be set.
• With LP-400/V compatible command mode, the character string No. 51 to 100 cannot be set and readout.
⿎ Setting request data / response data for readout
Start
code
STC
Sub
command
[Object No.] [System reserved value] [First string No. to apply]
[Last string No. to apply] ... (varies by character arrangement)
(Check
sum)
End
code
Sub command is “S” for the setting request data and “A” for the response data for readout.
⿎ Readout request data
Start
code
STC R
[Object No.]
2-byte
(Check sum) End code
⿎ Data description
1. When the character arrangement is straight line
Name
(> Name in LP-400/V)
Data length
[byte]
Data contents Remarks
Object No.
(> Character
condition No.)
2 “01”–“60”: Object No. 1001 to 1060
System reserved
value
(> Area No.)
1 “0”–“9”, “A”–“F”
This value does not affect the settings
anymore.
First string No. to
apply
2
“01”–“50”: string No. 1 to 50 (for current
file)
“51”–“60”: string No. 101 to 110 (for all
files)
• Select the string number from the
preset reference list.
• Applies all strings from the first
string No. to the last string No. to the
specified object.
• Specify the smaller no. to the starting
row no. than the last string No.
• To set only one string, set the same
string No. to the first and last string
No.
• If the string No. without setting is
specified, that string is included in
the marking layout as a blank line.
Last string No. to
apply
2
Character spacing
type
1
“0”: Fixed spacing
“1”: Proportional
“2”: Justify
• With “Justify” setting in straight line,
if the value of character width x digit
number is smaller than the character
string width, the character width is
adjusted narrower automatically.
• When the proportional is set, select
the proportional type in file settings.
ME-LP-GS-SR-COMP-3