Omron CP1L CPU UNIT - 03-2009, Operation Manual

Page: 703 / 810

669
Auxiliary Area Allocations by Address Appendix D
A36 00 Operation
Command
Flag 1 This flag turns ON during an opera-
tion command for inverter positioning
1. ON: Opera-
tion command
executed.
OFF: Stop
command
executed. --- Cleared When
inverter
positioning
1 is started ---
01 Forward Oper-
ation Com-
mand Flag 1 This flag turns ON during a forward
operation command for inverter posi-
tioning 1. ON: Forward
command in
progress
OFF: Reverse
command in
progress or
stopped --- Cleared When
present
value of
error
counter 1
is positive ---
02 Reverse Oper-
ation Com-
mand Flag 1 This flag turns ON during a reverse
operation command for inverter posi-
tioning 1. ON: Reverse
command in
progress
OFF: For-
ward com-
mand in
progress or
stopped --- Cleared When
present
value of
error
counter 1
is negative ---
03 In-position
Flag 1 This flag turns ON when inverter
positioning 1 is in position. ON: In posi-
tion
OFF: Not in
position --- Cleared When
pulse out-
put to error
counter 1
is stopped
and the
present
value of
error
counter 1
is within
the in-posi-
tion range ---
04 Error Counter
Error Flag 1 This flag turns ON when an error
occurs in the error counter for
inverter positioning 1. ON: Error
counter error
OFF: No error --- Cleared When
pulse out-
put to error
counter is
stopped
and abso-
lute value
of error
counter
present
value is
greater
than or
equal to
error
counter
error
detection
value ---
05 Error Counter
Pulse Output
Flag 1 This flag is ON while pulses are
being output to the output counter for
inverter positioning 1. ON: Pulses
being output
OFF: Pulse
output
stopped --- Cleared When
pulse out-
put to error
counter 1
is started ---
06 Error Counter
Pulse Output
Acceleration/
Deceleration
Flag 1 This flag is ON while pulse output to
the output counter for inverter posi-
tioning 1 is accelerating or decelerat-
ing. ON: Pulse
output to the
error counter
is accelerat-
ing or decel-
erating (i.e.,
the fre-
quency is
changing)
OFF: Pulse
output to the
error counter
is constant --- Cleared When
pulse out-
put fre-
quency to
error
counter is
changed
by ACC or
PLS2
instruction ---
Address Name Function Settings Status
after
mode
change
Status
at star-
tup
Write
timing
Related
flags, set-
tings
Words Bits