Trouble locating and clearing procedures (continued) 1-19
DMS-100 Family NA100 Trouble Locating and Clearing Procedures Volume 2 of 2 LET0015 and up
Removing an MP position from service (integrated)
(continued)
Removing an MP position from service (integrated)
At the MAP
1
To access the MP level, type:
>MAPCI;MTC;PM
and press the Enter key.
>POST TPC x;MP
and press the Enter key.
where
x
is the TOPS position controller (TPC) number
2
To post the relevant MP position, type:
>POST P n
and press the Enter key.
where
n
is the MP position number (0, 1, 2, or 3)
ATTENTION
Continue if a step in a maintenance procedure directs you to this procedure. If you use
this procedure without direction from a maintenance procedure, equipment damage or
service interruption can occur.