1-254 Trouble locating and clearing procedures (continued)
297-8021-544 Standard 14.02 May 2001
Replacing a point-of-use power supply card
(end)
16
Clamp the insertion and withdrawal tool to the front edge of the replacement
card, as shown in step 11. Align the card with the socket and carefully insert
the card.
17
Make sure the card sits in a secure position.
18
Carefully push the drawer back into the shelf until the thumb-latch button
locks.
19
To return the drawer to service, type
>RTS DRWR drawer_no
and press the Enter key.
where
drawer_no
is the logical number of the line drawer, 00 to 15
20
The procedure is complete. Return to the main procedure that sent you to
this procedure and continue to follow the directions.
