1-220 Trouble locating and clearing procedures (continued)
297-8021-544 Standard 14.02 May 2001
Replacing a line card
(continued)
5
Locate the card that needs replacement (it can be either a 3-in or a 6-in card).
6
Clamp the insertion and withdrawal tool to the front edge of the card, as
illustrated below. Carefully remove the card from the connector pins.
DANGER
Risk of personal injury
The large flat rectangular component mounted on the front
edge can be very hot. of line cards. To avoid burns to your
fingers, use the insertion and withdrawal tool to remove the
card as illustrated in step Section 6, "Clamp the insertion and
withdrawal tool to the front edge of the card, as illustrated
below. Carefully remove the card from the connector pins."
on page -220.
Thumb-latch button
Line cards
Line drawer
